2 year warranty
Wash the parts that have come into contact with food in hot water with liquid soap. All parts, except the motor unit, can also be cleaned in the dishwasher. Never immerse the motor unit in water. If necessary, clean it with a moist cloth.
You are advised to pre-rinse the parts under tap water before putting them into the dishwasher for best results.
In case some food ingredients wrongly entered the water tank, it might happen they get stuck to the heating element in the water tank and can't be removed by only rinsing the water tank. Please follow these steps to clean the water tank:
To prevent the buildup of food residuals or mold:
Immerse the parts in warm soapy water for about half an hour to soften the residuals and remove them using a brush.
If your Philips Avent Combined Steamer and Blender does not steam or does not steam properly, we are here to help. Just follow these steps to resolve it yourself.
There can be several reasons why the steam function does not work (properly):
If the steam function is still not working it could be that the safety switch is defect. Please contact us.
If the Philips Avent Steamer and Blender will not switch on, it may be because:
If you the jar is leaking, this may be because:
The sieve may not attached to the lid of the jar. Make sure the sieve is attached to the lid of the jar.
Most commonly, steam escapes the Philips Avent Steamer & Blender water tank because:
This is normal, you need to hold the control dial in blending position to blend. This is a regular safety feature enabling you to control the blending process.
During the first times of use this unpleasant smell is normal. If the appliance continues to give off this smell after you have used it a few times, check if the processing quantity and processing time are correct. Process small quantities and do not let the appliance blend for more than 30 seconds at a time.
The information on this page applies to the following models: SCF870/22, SCF870/21, SCF870/20.
Looking for something else?
Discover all Philips Support options